Stormwater Sampler With Rain Gauge Model SS505
Technical Characteristics:
Easy to operate – no programming required
Rugged, lightweight and easy to install
Peristaltic pump eliminates sample contamination
Rain gauge automatically drains after 24 hours
Battery powered for 3 months before charging
1.0 liter polyethylene sample bottle
Less than 15 lb (7kg) weight
Flow rate - 1,000 ml per minute at 4 feet head
Maximum lift – 22ft (6,6m)
Solid state Water Level Sensors with a 15' (5,0m) cable
Rechargeable Battery 12V 5AH Gel Cell
Environmental Wastewater Sampler model WS300
Technical Characteristics:
Ideal for wastewater, industrial and environmental sampling
Simple to operate – no programming required
The easiest and most reliable method for collecting water quality samples
Lightweight, rugged and easy to carry
Timed and external flow pulsed composite samples
Peristaltic pump prevents sample contamination
Rechargeable battery or AC powered
Refrigerated/cooler options available
Sample size can be adjusted for 25 mL to 600 mL – 700ml bottle capacity
Less than 22lb (10kg) weight
Bottle and hose in polyethylene
Flow Rate: 1000 ml per minute at 4 ft (1,2m) head
Maximum Lift: 22' (6,6m)
Battery: Rechargeable 5 AH Gel Cell, including 5 events/24h rain
Composite/Discrete Water Sampler Model WS700
Technical Characteristics:
Operating Temperature: 0° to +70°C
Size of unit: 22”H X 17"W X 9"D
Weight: 20lb (Shipping Weight 22lb)
Materials:
Enclosure: Expanded UV protected PVC
Bottle: 2.5 gallon Polyethylene
Pickup Hose: 15' reinforced PVC 1/4" ID polyethylene flexible tubing section with intake strainer
Pump Tubing: Norprene 1/4" ID, 7/16” OD
Sample Pump
Flow Rate: 1000 ml per minute at a 4 foot head
Type: Peristaltic
Maximum Lift: ~20 feet
Battery: Rechargeable 5 AH Gel Cell
Battery Life: ~1 hour, continuous pumping under load
Standby: 3 months while still retaining enough power to run the pump to capacity
Start Delay: 16 time settings from 0 to 12 hours
Composite Interval: 15 time settings from 5 min. to 12 hours plus an External Trigger mode setting
Sample Size: 15 composite sample sizes from 50ml to 2 liters plus a Full Bottle discrete setting (Approximate sizes at 4 foot head)
External Trigger Input: 250mS minimum pulse width Switch closure or 4-24VDC
Pulse Output: 5VDC one-second pulse 1000 ohm output impedance
Bottle Switch Input: Switch closure Input Floating read switch in bottle
Rain and Water Sensors: Optional moisture sensors or switch closure inputs
Internal Fuse: 10A Slow-Blow
Applications:
Our new WS700 single-bottle composite/discrete water samplers combine all the features you need to meet a wide variety of water sampling requirements, including those for stormwater, industrial discharge, water and wastewater treatment, waste collection systems, and rivers and streams.
Make the Download of the
SP100 Water Sampler
Technical Characteristics:
Enclosure: Expanded UV protected PVC (9" x 7.5" x 4.5")
Weight: 6lb (Shipping Weight 7lb)
Operating Temperature: 0-70°C
Sample Pump
Flow Rate: 1000 ml per minute at 4 ft. head
Type: Peristaltic
Maximum Lift: 22'
Pump Tube: Norprene 1/4" ID
Sample Hose: 15' nylon reinforced 1/4" ID polyethylene flexible tubing section with intake strainer. Hose may be extended, as required, using standard 1/4" tubing and fittings
Battery: Rechargeable 5 AH Gel Cell
Battery Life: The battery will power the sampler for appoximately 2 1/2 hours of continuous sampling
Applications:
The portable water sampler is ideal for removing samples from shallow wells and surface water sources, including lakes, ponds, and holding pools. The water sampler is lightweight, rugged, easy to use, weather resistant, and requires minimal maintenance. The water samplers are designed to take a manual sample and they have the ability to backflush the sample hose once a sample has been taken.
Make the Download of the Datasheet
SP200 Peristaltic Sampling Pump
Technical Characteristics:
Enclosure: Expanded UV protected PVC (9" x 7.5" x 4.5")
Weight: 4.5lb (Shipping Weight 6lb)
Operating Temperature: 0-70°C
Operating Voltage: 12V DC
Current Draw: 2A max
Sample Pump
Flow Rate: Variable Analog, up to 500 ml per minute at 4 ft. head
Backflush Rate: Same as Flow Rate
Type: Peristaltic
Maximum Lift: 22'
Pump Tube: Norprene 1/4" ID
Sample Hose: 15' nylon reinforced 1/4" ID polyethylene flexible tubing section with intake strainer. Hose may be extended, as required, using standard 1/4" tubing and fittings
Applications:
Global Water's SP200 variable speed portable peristaltic pump sampler is ideal for removing samples from shallow wells and surface water, including lakes, ponds, and holding pools. The water sampler is lightweight, rugged, easy to use, weather resistant, and requires minimal maintenance. The manually-operated peristaltic pump can backflush the sample hose after a sample has been.
Make the Download of the Datasheet
