FP101 & FP201 GLOBAL WATER FLOW PROBE
Digital Water Velocity Meter
Technical Characteristics:
Easy flow monitoring
Digital display in ft/sec or m/sec
Lightweight, rugged, and reliable
Highly accurate
Used by water professionals worldwide since 1990
Displays instantaneous and true average velocity 0,1 m/s a 8 m/s
Sensor Type - Protected Turbo-Prop propeller with electro-magnetic pickup
Power: Internal - Watch type battery/1 year life
Applications:
The Flow Probe model FP101 and model FP201 are ideal for storm water runoff studies, sewer flow measurements, measuring flows in rivers and streams, and monitoring velocity in ditches and canals.
Make the Download of the Datasheet
Electromagnetic Flow Sensors model EX100/200
Technical Characteristics:
Accuracy: 1% of full scale
Output: Square wave pulse, opto isolated, 500 Hz @ 20 ft/sec
Bi-Directional: Direction output, opto isolated
Empty Pipe Detection: Flow defaults to zero
Flow Range: 0.2 - 20 ft/sec (.06 - 6.09 m/sec)
Maximum Pipe Pressure: 200 PSI (13.8 bar)
Temperature: Ambient 0 – 180F (-17º - 82ºC) • Fluid 32 – 212F (0º - 100ºC)
Minimum Conductivity: 20 microsiemens/cm
Power: 12 - 24 Vdc, 250 mA
Installation Fitting Size: 1-1/2” Male NPT
Materials:
Mechanical: 316 SS/Brass
Electrodes: Hastelloy
Electrode plate: PVDF
Housing Cast: powder-coated aluminum
O-rings: EPDM
Applications:
The EX100/200 Electromagnetic Flow Sensors were developed to measure flow rates in hidraulic pipes. EX101 fits any 1-1/2" pipe fitting (standard saddle, for instance) and adjusts to pipe sizes 3-10" EX201 adjusts to pipe sizes 10-48" Meter extends only about 1/8 of pipe diameter, minimizing potential for clogging with debris.
Make the Download Datasheet
Turbine Insertion Flow Meters model TX80
Technical Characteristics:
Accuracy: +1% of full scale
Flow Range: 0.2 - 30 ft/sec (.06 - 9.14 m/sec)
Sensor/Output: Hall Effect Sensor - 12 VDC current sinking pulse
Maximum Pipe Pressure:
Polypro: 175 psi @ 75F (12 bar)
Brass: 200 psi (14 bar)
316 SS: 250 psi (17 bar)
Maximum Temperature:
Polypro: 130F (55ºC) at 0 psi
Brass, SS: 200F (93ºC) at 0 psi
Nominal K-factor: 11 Hz/F/s (3.6Hz/M/s)
Power: 6 - 24 Vdc, 8 mA minimum
Materials:
Sensor Body: Polypro, Brass, 316 SS
Rotor: Polypro
Shaft: Nickel-bound tungsten carbide
Bearings: Ruby
Cable: #22 AWG 3-con 18' (6m)
Maximum Cable Run: 2,000' (650m)
Applications:
TX80 Turbine Insertion Flow Meters are ideal for chemical proportioning applications. The TX80 Series Turbine Insertion Flow Meters require special fittings, since they are not depth-adjustable, installation in the fitting ensures correct depth placement in the pipe. Fittings are available in PVC, brass, and stainless steel. Insertion Turbine Flowmeters are available in brass, 316 stainless steel, and polypropylene.
Make the Download of the Datasheet
Sewage Lift Station Wastewater Level Sensor model WL430
Technical Characteristics:
Electrical:
Excitation: 8 - 38 Vdc
Output: 4–20 mAdc
Zero Balance: ±1% FSO
FSO Setting: ±1% FSO
Resolution: Infinite (±0.001% FSO usable)
Response Time: < 5mS
Insulation Resistance: 1000 MO @ 50 Vdc
Reverse Polarity: Protected
Warm-Up: < 10 mS
Power Supply Effect: = ±0.002% FSO per V input
EMI/RFI: Internal Filtering
Lightning Protected: MOV and dual gas discharge tube • Life Lightning protection warranty
Short Circuit Protected: Up to 40 Vdc
Performance:
Static Accuracy: ±0.5% FSO ( BFSL, RSS) (combined effects of non-linearity, hysteresis & repeatability)
Repeatability: ±0.1% FSO
Temperature Effects: ±1.5% FSO over comp range (combined effects of Zero & FSO with reference at 70F)
Long Term Stability: ±0.25% FSO per year
Mechanical:
Pressure Ranges: 10psi
Proof Pressure: 2x Full Scale
Burst pressure: 5x Full Scale
Materials: 316L SST plus cable
Pressure Port: Flush mount per outline
Electrical Connector: 1/2”-NPT Male submersible conduit fitting with 40ft of polyurethane cable
Dimensions: 6" long x 3" diameter
Weight: Nominal 20 oz
Compensated Temp Range: 20 to 170F
Operating Temp Range: 0 to 200F
Storage temp range: -20 to 250F
Applications:
The Sewage Lift Station Wastewater Level Sensor's “Steelcage” design offers the highest reliability in level measurement for severe high solids environments such as sewage, lift stations, storm canals, wet wells and slurry tanks.
Make the Download of the Datasheet
Sewer Flow Monitor model FC200-S
Technical Characteristics:
Rate Display: 6 digit + decimal place, LCD
Totalizer Display: 6 digit + decimal place, LCD
Accuracy: Pressure transducer: ±0.2% FS, Flow Monitor: ±0.01% + the depth-flow-table error
Flow Units: CFS, GPM, m3s, MGD
Totalizer: Related to Flow Units
Enclosure: 4 3/4" W x 8" H x 3" D, NEMA 4X (IP67)
Power: 120 VAC to 240 VAC, optional: Battery powered (Must be specified at time of ordering)
Current Draw: 50mA Typical, 16mA in sleep mode, and 120mA when the output relays are on
Applications:
The Global Sewer Flow Monitor is reliable and accurate for measuring and totalizing sewer flows for flumes and weirs. The sewer flow meter measures water depth with the highly accurate Global Water pressure transducer. The electronic circuitry instantly calculates and displays sewage flow and totalizer values for any depthto- flow relationship in any engineering units. The sewer flow meter is easily set up in the field using its unique four-button programming system.
Make the Download Datasheet
Industrial Water Meter model CZ50WS
Technical Characteristics:
Nominal Opening: 2 in
Maximum flow: 30 m³/h
Nominal flow: 15 m³/h
Transition flow: 225 L/h
Minimum flow: 90 L/h
Service Pressure: 16 bar
Head loss: 0.4 bar
Minimum reading indicated: 0.5L
Applications:
The CZ50WS Industrial Water Meter is ideal for water mains, factory inlet, pipes and Industrial water monitoring; Real time clock-calendar onboard, Remote monitoring available; Moving parts do not degrade or misrepresent flow information over time; Detect leaks; 5 Years Warranty; The information stored on the meter will show water consumptions that are statistically outside normal consumption (Digital display); work perfectly at low flows.
Make the Download Datasheet
Smart Water Meter model CZ2000
Technical Characteristics:
|
Units |
CZ2000-3M |
CZ2000-5M |
CZ2000-10M |
CZ2000-20M |
| Nominal thread |
mm |
15 |
20 |
30 |
40 |
| Maximum flow |
m3/h |
3 |
5 |
10 |
20 |
| Nominal flow |
m3/h |
1.5 |
2.5 |
5 |
10 |
| Transition flow |
l/h |
22.5 |
37.5 |
75 |
150 |
| Minimum flow |
l/h |
15 |
25 |
50 |
100 |
| Start-up flow under |
l/h |
7 |
9 |
35 |
45 |
| Pressure of service |
bar |
16 |
16 |
16 |
16 |
| Lowest significant digit |
liters |
0.1 |
0.1 |
0.5 |
0.5 |
| Installation position |
-- |
H/V |
H/V |
H/V |
H/V |
Applications:
Ideal for multi-story buildings, shopping centers, homes, and anywhere water metering is necessary; remote monitoring available; The smart water meter can be read electronically with a local PC or modem; Moving parts do not degrade or misrepresent flow information over time; Detect leaks; 10 Years Warranty; The information stored on the meter will show water consumptions that are statistically outside normal consumption (Digital display); work perfectly at low flows.
Make the Download of the Datasheet
Magnetic Flow Meters model WMX101
Technical Characteristics:
Pipe Sizes: 4", 6", 8", 10"
Flow Range:
*4" 12-500 GPM
*6" 32-1200 GPM
*8" 60-2200 GPM
*10" 95-3500 GPM
Flanges: AWWA 150 lb. drilling
Pressure: 150 PSI working pressure
Temperature Range: 10F to 130F (-12ºC to 55ºC)
Accuracy:
±1% at 100% to 10% of reading
±2% at 10% of reading to cut off
Materials:
*Body: Welded steel, epoxy powder coated
*Liner: HDPE
*Electronics Housing: Die cast aluminum, powder coated
*Electrodes: 316 stainless steel
Rate Display: 6-digits in units of GPM (standard), MGD, Liters/minute, CFM
Totalizer Display: 8-digits in units of Gallons x 1000, CU Feet, CU Meters, Megaliters
Power: 12-24 VDC, 30 mA
Output Signal: Current sinking pulse, opto-isolated, 24 VDC, 10 mA max
Empty Pipe Detection: Hardware/software, conductivity-based
Environmental: NEMA 4X standard, (optional short-term immersible)
Dimensions/Weight:
| Size |
Width(mm) |
Height(mm) |
Depth(mm) |
Weight(Kg) |
| 4" |
250mm |
188mm |
15.9mm |
9.5kg |
| 6" |
300mm |
216mm |
17.5mm |
16.3kg |
| 8" |
352mm |
241mm |
17.5mm |
22.7kg |
| 10" |
450mm |
264mm |
17.5mm |
34.1kg |
Applications:
The WMX101 Magnetic Flow Meters are ideal for water mains, factory inlet, pipes and Industrial water monitoring; Simple and economical as a mechanical meter; No moving parts for low maintenance & long life; Minimal straight pipe required; Pulse output for loggers, PLC’s or telemetry; Solar power compatible.
Make the Download Datasheet
Inline Flow Meters model F460
Technical Characteristics:
Accuracy: ±2.5% of full scale
Materials:
Body: Polysulfone
Adapter: PVDF
Float: PTFE
O-rings: Viton
®
Half union: Anodized aluminum
Maximum Pressure: 150 psi (10.3 bar) @ 70F (21°C)
Maximum Pressure Drop: 2 psi
Maximum Fluid Temperature: 210F (98°C) @ 0 psi
Dimensions: 10" H x 1-3/4" dia
Weight (approx.): ½ lb (0.23 kg)
Applications:
The F-460N Inline Flow Meters is ideal for corrosive liquids where a meter with no metal in the fluid path is desirable.
